lifTER Technical Specifications

GENERAL
LCD Operating Temperature	-20 C to +70 C
Electronic Operating Temperature	-40 C to +70 C
Storage Temperature	-40 C to +90 C

ENVIRONMENTAL PROTECTION

PCB treatment Conformally coated for Mild H₂S exposure

Signal Connectors Gold Plated

Power Connectors Nickel Plated

Gasket Neoprene

Membrane Switches Chemical Resistant, UV Stable Polyester

Enclosure Stainless Steel standard
Other material optional

ENVIRONMENTAL PROTECTION
PCB treatment	Conformally coated for Mild H₂S exposure
Signal Connectors	Gold Plated
Power Connectors	Nickel Plated
Gasket	Neoprene
Membrane Switches	Chemical Resistant, UV Stable Polyester
Enclosure	Stainless Steel standard Other material optional

Power Source

Solar Panel 2 watt, amorphous

Battery Backup 20 cloudy days

Power Source
Solar Panel	2 watt, amorphous
Battery Backup	20 cloudy days

USER INTERFACE

LCD 4 x 20 Character Backlit

Keypad 5 x 4 tactile membrane

USER INTERFACE
LCD	4 x 20 Character Backlit
Keypad	5 x 4 tactile membrane

OVERALL DIMENSIONS

Stainless Steel enclosure Height 10 inches

Width 7 inches

Depth 6 inches

Mounts by a 2 inch pipe mount, or directly to a Motor Valve.

OVERALL DIMENSIONS
Stainless Steel enclosure	Height	10 inches
Width	7 inches
Depth	6 inches
Mounts by a 2 inch pipe mount, or directly to a Motor Valve.

TELEMETRY INTERFACE

RS232C
baud rate selectable at 1200, 2400, 4800, and 9600 bps.

MASTER STATION COMPUTER REQUIREMENTS

486 style, 8M memory minimum, 2-button mouse, VGA monitor.
Contact IAR for recommended Operating System.

MASTER STATION SOFTWARE

masTER© allows for up to 255 well sites.
Beam Pump-off Controllers, Alarm Status reporting, and Gas Injection units can be combined with plunger lift automation.

OPTIONAL ITEMS

Certification for Class I, Div II, Groups C, and D
Special Switch Graphics
Special Programming

Specifications subject to change without notice.

Equipment List

Material Required for Installation

lifTER
Solar Panel
External Well Signal Cable
Documentation
Mounting equipment (bolts/brackets)*
Necessary Tubing for Solenoid Valve*
Solenoid Valve** (Part #BO6-0299)
Arrival Sensor** (Part #BO2-0271)

Notes:

* Equipment not provided by IAR.

** Equipment available from IAR, but must be ordered separately.

Optional Equipment

Second Solenoid Valve (Part #BO6-0299)
Telecommunications package (Cellular, Radio, or Satellite)
High, Low, and Sales Pressure Switch Gauges
Tubing, Casing, and Sales Pressure Transmitters (Part #BO6-0325)
External Communications Cable (Part #BO7-0104)
Gas Flow Computer

Contact IAR Sales to see if plunger lift is an applicable method for your production needs.

tersales@ter-usa.com